Essential Tips and Tricks for Safely Pressure Washing Roof Tiles 

Summer is almost here, which means it’s time to start thinking about those big spring cleaning projects – like pressure washing roof tiles. But before you start blasting away, there are a few things you need to know in order to do it safely and effectively. Here are some essential tips and tricks for pressure washing your roof tiles. 

Always Start with a Lower Pressure Setting to Avoid Damaging Your Roof Tiles

When pressure washing your roof tiles, it is important to remember that more pressure isn’t necessarily better. Always start with a lower pressure setting in order to avoid potentially damaging your roof tiles. Too much pressure from the wand can cause deep erosion or altogether break off pieces of the tile, resulting in costly repairs down the road. This can be especially problematic on older roofs or tiles with softer materials like slates or terracotta. It is wise to err on the side of caution and begin with a light or moderate force setting before attempting higher levels if necessary.

Work in Sections and Move the Pressure Washer Back and Forth in a Steady Motion

Pressure washing roof tiles is an effective way to clean and preserve them. When performing this task, it’s important to work methodically, in sections, and move the pressure washer back and forth at a steady motion. This will ensure that your tile roof is properly cleaned, ultimately resulting in its longevity. Using a steady pattern when pressure washing will also maintain consistency across the entire roof while preventing the formation of any streaks. By employing these practices, your tiles will be successfully cleaned with ease.

Be Sure to Keep the Nozzle at Least 12 Inches Away from the Surface of Your Roof Tiles

Pressure washing your roof tiles is an effective and important maintenance task that can dramatically extend the life of your roof. To ensure you don’t unintentionally damage your roof, be sure to keep the nozzle at least 12 inches away from the surface at all times. This will allow your pressure washer to do its job safely and effectively as a strong blast of water from too close can dislodge tiles or erode grout which can lead to costly repairs down the line. Keeping a safe distance ensures you get a perfect clean without any of these consequences.

Rinse Off Any Soap or Cleaners that You Use After You’re Finished Pressure Washing

Pressure washing the roof tiles of your home is an important task, especially when it comes to protecting and preserving their surface. While it’s important to use a good quality soap or cleaner, it’s just as important not to let the residue sit on the tiles after you’ve finished cleaning. Always rinse off any soap or cleaners that were used during pressure washing with uncontaminated water so that there are no residues left behind, which can damage the roof tiles over time. It’s a simple step, but one that goes a long way in ensuring the longevity of your roof tiles.

Inspect Your Roof for Any Cracked or Damaged Tiles After You’re Done Cleaning

After pressure washing your roof tiles, it is important to inspect the tiles for any damage that may have been caused from the process. Checking for cracks and other signs of damage helps keep your roof in good condition and prolongs its longevity. Taking a few minutes to check your roof now can save you time and money in repairs and replacements down the road. Look closely at each tile to ensure that your roof remains in optimal condition after a pressure wash.

It’s important to be sure that you are taking the proper steps when pressure washing your roof tiles. There can be significant damage from using too high of a pressure setting, so starting low and gradually working your way up is the safest approach. Similarly, you should keep the nozzle at least 12 inches away from your roof tiles and work in sections, moving the pressure washer back and forth in a consistent motion. After you’re finished, any cleaning solutions should be rinsed off right away. Lastly, it’s important to inspect your roof for any cracked or damaged tiles after you’re done. A little care now can save you a headache down the road! With these tips in mind, pressure washing your roof tiles will be much easier and less risky.